Q. As darker days approach, how can we adjust our lighting to keep our home comfortable and well-lit?
Light fixtures and bulbs can have a huge impact on your mood, productivity, and the coziness of your living space. This is true all year long. But during the transition from summer to fall, lighting issues are particularly noticeable. Walkways and interiors can suddenly feel dramatically dimmer. And you may feel like you’re constantly chasing the illumination you need to cook, work, help with homework, or put on makeup. With some smart changes, however, you can brighten your home — and your outlook.
Start Outside. Adjust any timers on your exterior lights to accommodate the changes in daylight. If your walkways feel tough to navigate even when porch lights and lamp posts are on, consider incorporating path lighting — either 18-inch-tall posts or fixtures recessed into the pathway or its environs — to help you get safely in and out of the house. Remember that a little light goes a long way outdoors; 40-watt-equivalent bulbs typically work best. Anything brighter can actually make it harder to see.
Layer your light. A room needs a mix of light sources at different levels to create a warm glow and ensure you can see what you’re doing. These layers include ambient illumination from decorative fixtures such as a chandelier, pendants, or flush-mounts, as well as accent and task lighting — typically some combination of recessed or track fixtures, sconces, under-cabinet units, cove lights, and table or floor lamps. At this time of year, you may need to beef up your task lighting, bringing in an extra reading lamp or adding a fixture in a spot where you sew or do puzzles. When only one light source is used, as is sometimes the case with recessed fixtures, you get pockets of light and darkness that make the area difficult to navigate — and impossible to read in.
Assess lampshades. Consider swapping dark fabric shades, or older white ones that have yellowed, for crisp new ivory or white shades to bring more ambient illumination into your rooms. If you favor colored-glass shades, you may want to supplement with an extra fixture to brighten up your space. Clear-glass shades, meantime, can allow too much light to escape, causing glare and making a room feel shadowy, if not paired with proper bulbs — no more than 40-watt-equivalents on a dimmer are best.
Turn up the temp. Light bulb boxes indicate a color temperature, labeled K for Kelvin temperature. In general, but particularly at this time of year, opt for bulbs with a 2700K or 3,000K rating, which provide a universally flattering, warm-white light. Anything higher is going to have a cooler, bluish-white cast that can make your home feel as chilly as a feebly lit landscape on a winter’s day.
By Sanford Fogg
Photo Courtesy of Hubbardton Forge
Q: What should I consider when selecting fixtures for the exterior of my house?
A: The first step is determining the type of fixture, or fixtures, that best suit your house. This is, of course, a matter of personal taste. A flush-mount fixture works well on porches with low ceilings, while a pendant can be a good match for higher ceilings, depending on wind. Sconces on one or both sides of the door are a classic choice and can be combined with a ceiling fixture if you have a portico. If you have a tight space with no covering overhead, mount a single sconce near the door on the handle side. Whatever style you choose, invest in a quality material, such as copper, brass, or powder-coated forged steel. These metals come in multiple finishes and hold up well in Maine weather.
Choosing exterior fixtures that are too small is a common mistake people make. Lanterns that look large in a crowded showroom often get lost on the broad façade of a house. And when you stand back 50 feet, they appear about half their size. As a general rule, select models that are roughly ¼ to ⅓ the overall height of the door. Before making a purchase, cut cardboard to the size and shape of the light and affix it to your house, then stand on the street and see how it looks. Lamppost fixtures should match those in the entry and be approximately the same size. Garage fixtures are usually a little smaller and can be a different style if they are not visible from the front of the house.
Glare is another issue with a lot of exterior lights. A prime example is the motion-sensor flood lighting many people have on their garages. Instead of helping you see, these fixtures actually blind you! When it’s dark out, a little light goes a long way. One frosted, 40-watt-equivalent LED bulb per fixture is usually just right. To truly minimize glare, and light pollution in your community, opt for a “dark sky” fixture, which has a shade that shields the bulb and directs the beam downward — your neighbors will thank you!
In a new monthly column, Sanford Fogg, of Fogg Lighting in Portland, offers his best advice on illuminating your home.
Q: What’s the most important thing to consider when planning lighting for a new home or remodel?
A: Bringing in a lighting designer at the start of a project is key. This is not a luxury reserved for people with big budgets. We will consult with any customer, free of charge, in our store. For a reasonable charge, we’ll also make a house call, but this is not typically necessary. Working with floor plans or drawings, we can determine how much light you need in a room, what types of fixtures will work best, and where they should go. Because lighting is one of the last things to be installed in a house, people often don’t contact us until the final weeks of a project. At this point, the wiring is done and it’s no longer possible to alter the lighting plan. We see kitchens that are drastically under-lit, with a grid of recessed lights in the center of the room instead of over the work surfaces. In living rooms, people frequently use recessed fixtures like klieg lights overhead, when they should be positioned around the room’s perimeter to create more comfortable, ambient illumination — to name just a couple of potential pitfalls.
Because contractors’ allowances are sometimes not enough to cover the type of lighting homeowners want or need, we also help clients devise a realistic budget up front so they are not hit with unexpected costs at the end of the process. You can spend a lot of time and money on your plans and architect, and choose the prettiest countertops, tile, and art, but if you don’t light it all properly, you can’t take full advantage of, or truly appreciate, the work you’ve done.
My first involvement with landscape light was courtesy of Home Depot. Before I was in the lighting industry and knew better, I went to Home Depot and bought a really inexpensive kit containing a small transformer, 3 or 4 up lights and some low voltage wire. I hooked it all up and enjoyed looking out at my backyard until piece by piece the system stopped working.
I really like landscape lighting when done correctly and subtly. The photo at right shows a tastefully lit back yard. Notice the depth of field that the lighting produces. The trees are beautiful and the steps are lighted. Landscape lighting brings the outdoors in and creates a focal point for people inside the house. It eliminates the “black hole” effect of windows at night. I can guarantee you that this lighting is not from Home Depot.
Most Landscape lighting is low voltage, meaning a transformer reduces normal household voltage from 120V to 12V (24V in some circumstances). A two conductor wire is run from the transformer to the individual fixtures. The further away from the transformer the lower the voltage becomes. This is called voltage drop and is due to the resistance in the wire and the power that other lights are drawing from the transformer. Thus lights get dimmer the further they are from the transformer. LED technology is really beneficial in landscape lighting because LED’s use less power and therefore voltage drop is much less noticeable.
When contemplating landscape lighting consider buying the best you can afford. There is a big difference in quality. Landscape lighting is exposed to the elements 24/7 and needs to be water tight and corrosion resistant. Landscape lighting is really enjoyable. Install some today!
Please visit FoggLighting.com and call or email with any questions or comments.
